We know that due to the bending stress of Blow Micro-cable itself, when it is released from the cable reel, the Blow Micro-cable is not straight, so when we blow the Blow Micro-cable into the microduct, the Blow Micro-cable is in the microduct actually moves forward in a spiral shape, so the high-quality microduct with a small friction coefficient actually reduces the frictional resistance of the Blow Micro-cable.

The footsteps of time, along the winding river, walked all the way, and entered August. We welcome the sixteenth birthday of Fiber Cable Solution Technology Co.,Ltd. (hereinafter referred to as: FCST). Our narrative begins on the ordinary but unusual day of August 18, 2006. Sixteen years ago, this day was the day when FCST began to sow hope, and sixteen years later, FCST is moving forward with a more determined pace On the road to the rise of the optical communication field.

There are primarily four ways to install direct buried microducts: l Using a machine or hand to excavate an area and install them directly into the ground. l Placing it into a slot-cut or micro trench. l Using a mole plow. l Integrating it into an existing duct. Before you begin any of these installations, you will want to use a manufacturer-supplied tube cutter to cut the microduct. Do not use any other cutting tool. Next, you need to make sure a sealing plug covers both ends of the microduct. Putting this in place will prevent any water or dirt from contaminating the duct and possibly causing damage. Finally, you want to check to see if you've trapped the drawcord with the sealing plug.

Silicon Duct and Micro Duct, as the world's most advanced optical cable sheathing materials, have been widely used in communication optical cable sheathing in various fields. They not only protect optical cables, but also speed up the construction of optical cables. , which can save the investment and construction period of the same-route optical cable construction, and lay a solid foundation for the development of communication.

what QC tests the Micro Duct Connector will go through before it leaves the factory before it can get into the hands of users. The Micro Duct Connector were developed to connect microducts with each other.Our system enables an easy, fast connection and disconnection of the microduct. The connectors’ robust construction resistance to high pressure forces,allowing them to be used in direct buried (DB) applications. The transparent body enables easy visual inspection of the cable with in the connector. ​